Home » Sierra Blog » Clean Energy
Official Blog of Sierra--Let's Talk Flow!

Overcoming Natural Gas Sampling Challenges in Oil & Gas Applications


Mar 03, 2017
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

It is a fact that in order to comply with various government rules and regulations, oil and gas companies have to continually take natural gas samples to prove the gas composition and amount of gas flowing in their oil fields. The challenge comes in trying to actually take an adequate gas sample representative of the […]

Read the Story

Sierra’s Biggest Stories from 2016


Jan 09, 2017
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

2017 is here and this year will bring many new exciting developments at Sierra, but before launching completely into the new year, let’s take a look back at our top stories of 2016. New at Sierra in 2016 We’re always looking for new ways to communicate and interact with our customers and industry. Find out about three […]

Read the Story

Reducing Costs of Steam Flow Measurement


Aug 19, 2016
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

Traditionally, steam flow has been measured with a differential pressure device. This is typically an orifice plate. However, such devices are inherently volumetric flow measurements. As we have discussed in previous blog posts, changes in pressure and temperature will change the mass flow rate of steam. Even a “small” change of 10% in steam pressure […]

Read the Story

How to Achieve Precise Air-Fuel Ratio Control in Burner Control Applications


Aug 12, 2016
Kam Bansal, Dir. of Engineering
Written By:
Kam Bansal, Dir. of Engineering

Mass flow control is all around us. One common application for industrial mass flow control is air-fuel ratio control of burners in industrial heating processes for manufacturing and other industries. For burner control in manufacturing, precise mass flow control of the air-fuel ratio to the burner keeps melt temperatures constant which produces quality products including […]

Read the Story

Tuning Your Boiler for EPA Boiler MACT Compliance


May 12, 2016
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

The EPA’s Boiler MACT (Maximum Achievable Control Technology) regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally published in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller […]

Read the Story

Minute Flow Tip Video: Steam Measurement in Large Pipes—Hot Tapping


Mar 31, 2016
Maryadine Washington, Mar-Com Manager
Written By:
Maryadine Washington, Mar-Com Manager

Learn more about the product featured in this video:  InnovaMass 241i Insertion Vortex Flow Meter Need more information on measuring steam? Learn more about maximizing steam productivity and reducing the overall cost of ownership for additional energy savings when measuring steam. A new “Minute Flow Tip” will be posted to our YouTube channel every month. […]

Read the Story

How to Reduce Methane Emissions with Thermal Mass Flow Meters


Feb 11, 2016
Glen, Account & Market Manager
Written By:
Glen, Account & Market Manager

The flare gas discussion is heating up again. According to the Bureau of Land Management (BLM), U.S. oil production is at an all-time high, and so are the harmful methane emissions from leaks, flaring and venting. U.S. Secretary of the Interior Sally Jewell has proposed to update 30-year-old regulations in order to reduce the excess release of natural […]

Read the Story

It Has Apps! Our New Vortex Flow Meter Empowers You


Dec 10, 2015
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

Sierra’s next generation InnovaMass “iSeries” features a new hyper-fast microprocessor, robust software apps, and an automated state-of-the-art manufacturing and flow calibration facility to assure the highest level of quality and delivery. It Has Apps! The InnovaMass iSeries features flow management apps driven by our new Raptor II OS that will empower your process and save you time and money. ValidCal […]

Read the Story

Thermal Mass Flow Meters Offer Oil & Gas Companies Lowest Cost of Ownership


Aug 28, 2015
Maryadine Washington, Mar-Com Manager
Written By:
Maryadine Washington, Mar-Com Manager

The Wall Street Journal recently reported that oil prices have hit a rock bottom $40 a barrel, the lowest since 2009. How does this affect the oil companies? Well, the consumer gets the benefit of the low pump price which does loosen discretionary spending, but the oil & gas companies are hurting-spending less money on capital investment […]

Read the Story

Everything You Need to Know About Sub-Metering Natural Gas


Jun 29, 2015
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

We’ve written quite a bit about the benefits of using thermal flow meters to sub-meter natural gas in large facilities. So much so, that we’ve decided to create one post that can be your go-to resource for finding information on the topic. Here you’ll find links to easily digestible content like infographics and SlideShare presentations, […]

Read the Story

For the First Time, Field-Adjust For Gas Composition Changes, Retain Accuracy, Save Time and Money


Jun 05, 2015
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

For the first time, customers can adjust their gas composition in the field on thermal flow meters to solve EPA reporting challenges. When gas composition changes, typical thermal meters must be sent back to the factory to be re-calibrated in order to maintain required accuracy levels.  All of this is a costly, time consuming endevour. Imagine the time […]

Read the Story

Take Charge of Your Facility’s Water Usage…


Oct 27, 2014
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

Water is a precious resource! Now, more than ever, businesses and facilities must take charge of their water usage to help with water conservation and lower water bills. Water conservation begins with knowing exactly how much water you are using in your process or facility. When you know how much water you are using, you can adjust […]

Read the Story

The Secret to Slashing Your Facility’s Natural Gas Bills


Aug 26, 2014
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

Psst. We’ve got a secret. One that could save you money. How much, you ask? Thousands. That’s right. You could be saving thousands on your facility’s natural gas bill. Traditional diaphragm flow meters used for natural gas measurement can’t account for changes in gas composition, resulting in a utility bill that can be less than […]

Read the Story

Part 3: Accurately Measuring Flare Gas — Managing Gas Mix Changes, Retaining Accuracy, Reducing Cost of Ownership


Mar 17, 2014
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

In my last post, I compared the pros and cons of the various flow meters available for measurement of flare gas. Ultimately, all but one has limitations that will impede your ability to accurately measure excess burn off from the hydraulic fracturing process. In this week’s post, I’ll share a new generation thermal mass flow […]

Read the Story

Part 2: Accurately Measuring Flare Gas — Innovations Promise More Economical Choices


Mar 03, 2014
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

In my last post on flare gas flow measurement, I shared how the rise in hydraulic fracturing has led to more stringent state and national mandates to regulate the measurement of waste and excess gases that are produced as a result of this process. If you’re affiliated with an oil or gas company, you know […]

Read the Story

Part 1: Accurately Measuring Flare Gas — Challenges, Solutions, and Opportunities


Feb 25, 2014
Matthew Olin, President & CEO
Written By:
Matthew Olin, President & CEO

If your company is involved with hydraulic fracturing to increase oil and gas production, you’re familiar with the fact that state and national regulations are becoming increasingly stringent. In particular, flare gas now requires the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result of the hydraulic […]

Read the Story

Talking Biogas Production In Europe


Feb 03, 2014
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

Europe is quickly becoming a hotspot for the biogas industry, and Sierra and our local French distributor Alto Instruments took advantage of that fact by exhibiting at BiogazEurope in France. Attendees learned about the entire biomass process, from the bio side of things (mass) to the energy side (electricity). Some trending applications featured at the […]

Read the Story

Voice of the Customer: Flow Meter Solution for Air Pollutant Measurement


Nov 15, 2013
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

We’re always looking for solutions here at Sierra-ones that always give customers precise, accurate data. It’s what drove Dr. John G. Olin to found Sierra in 1973, with a goal of providing the marketplace with accurate flow meter measurement. It’s what drives our engineering team to continue to advance flow meter design. It’s also what […]

Read the Story

Part 2: Challenges with Submetering Natural Gas


Nov 11, 2013
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

I previously shared a post on how mid-to-large size facilities can save money by taking the initiative to submeter natural gas usage. The traditional diaphragm meters used by utility companies rely on fixed compensation variables that can lead to inaccuracies and overcharging. While this can affect residential customers, it comes as no surprise that it […]

Read the Story

Innovation Winner-Precision Gas-Ratio Control Applications


Nov 04, 2013
Maryadine Washington, Mar-Com Manager
Written By:
Maryadine Washington, Mar-Com Manager

Thanks Flow Control Magazine for recognizing Sierra’s QuadraTherm 640i/780i four-sensor thermal mass meter as this year’s Innovation Award winner. We are honored. The recently published case study in Flow Control magazine this month, explores how the QuadraTherm 780i provides a fiberglass manufacturing company with precise gas-ratio control to increase production capacity and gas consumption efficiency. […]

Read the Story

Part 1: Challenges with Submetering Natural Gas


Oct 28, 2013
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

In an article for Gases & Instrumentation magazine, I explored energy management as it relates to the natural gas industry. Natural gas exists in abundance in this country, with production expected to increase 44 percent by 2040. With such unprecedented growth in production of this natural resource, utility companies must focus on providing the most accurate gas […]

Read the Story

Part 1: Emerging Trends of Thermal Flowmeters


Oct 09, 2013
Jesse Yoder
Written By:
Jesse Yoder

In this guest post, I’ll be comparing the Coriolis and Thermal flowmeter markets, an interesting undertaking when you consider some of the facts. Both technologies were introduced about the same time, in the mid-1970s. But the worldwide Coriolis meter market has grown to exceed $1 billion, while the Thermal flowmeter market is valued at less […]

Read the Story

How to Measure Air Flow Rate–Not As Easy As it Appears


Oct 04, 2013
Morgan Zealear, Engineer
Written By:
Morgan Zealear, Engineer

If we look at what is considered low flow measurement of air mass flow rate,  those applications ranging from 0 to 10 sccm up to 0 to 1000 slpm ranges, there is a right way and a wrong way to measure. It’s an inherent problem many of our customers face before they find the right […]

Read the Story

Totalize Multiple Gases Independently: Watch Video!


Sep 26, 2013
Brian Estep, Software Engineer
Written By:
Brian Estep, Software Engineer

The need to measure, totalize, and monetize gas flow is not going away. In fact, the requirement to accurately totalize and monetize gas is becoming even more critical with our boom in natural gas and other industrial processes. Almost all mass flow meter companies have the ability to totalize one gas being measured. This is pretty standard […]

Read the Story

Break from the Shackles-Mid-to-Large Size Facilities Verify Utility Company Billing


Sep 20, 2013
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

As we have all been hearing in the news, natural gas is becoming a very valuable and abundant natural resource. Almost all of this increase is due to the projected growth in shale gas production which will grow to 16.7 trillion cubic feet in 2040. Now comes the big question: how are utility companies going […]

Read the Story

Part 3: Biogas Flow Meter Measurement-The Solution


Sep 16, 2013
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

In recent weeks, I’ve shared some exciting advancements in the biogas industry in regards to renewable energy management. From harnessing biogas energy from landfills to the digester gas produced at wastewater treatment plants, one thing is paramount: Adjusting for changing gas composition is critical to obtaining accurate flow meter measurement for optimal biogas energy collection.  […]

Read the Story

Part 2: Biogas Mass Flow Measurement–The Challenge


Sep 05, 2013
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

In my previous posts, I shared the focus on the growing need for renewable energy sources in the United States, with biogas becoming a hot commodity. Common sources include harnessing biogas from landfills, as well as digester gas produced at wastewater treatment plants.  One of the major flow measurement challenges in biogas applications is the fact […]

Read the Story

Biogas Flow Meter Measurement: The Flooded Market


Jul 31, 2013
Scott Rouse, Product Line Director
Written By:
Scott Rouse, Product Line Director

In my recently published article in Biomass Products & Technology , Precise Biogas Flow Measurement: Overcoming the Challenges of Changing Gas Composition, I highlight the nationwide search for alternative energy sources.  In the article, I note that this search has led to increased interest in sources of biogas energy specifically. Many flow meter companies have jumped into […]

Read the Story

Biogas Energy Production: Why Accurate Flow Measurement Is Critical


Jul 25, 2013
Erica Giannini, Marketing Manager
Written By:
Erica Giannini, Marketing Manager

The buzz around biogas continues to grow and with good reason. Efforts to find renewable sources of energy are in full swing, and harnessing energy from landfill gas or digester gas into biogas is a promising solution to the problem of high oil prices. In the July 2013 issue of Biomass Products & Technology, Sierra’s […]

Read the Story

Report Bug
Submit a Bug Report

Name

Email

Reproducibility (Did you try to reproduce the bug?)

Classification

Summarize the problem but be specific enough that it can be recreated.

Note: Page, browser, and OS are automatically saved